| NTN LH-WA22215BLLS Thrust Tapered Roller Bearing | Oil Speed Rating n2:4000 rpm; d:90.000 mm; D:190.0000 mm; Grease Speed Rating n1:3000 rpm; B:43.00 mm; Basic Dynamic Radial Load Rating C:159000 N; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:137000 N; |
| Timken 210 TTSV 944 CA1481 Thrust Tapered Roller Bearing | Old MRC Bearing Number:207FS; Basic Radial Load Rating-Dynamic DC:25500 N; Width - Outer Ring B0:17.0 mm; Basic Interchange FAF:207KL; d:35.000 mm; Basic Interchange NDH:8507; Speed Rating-Single and Double Sealed Grease SDG:6300 rpm; Width - Overall B:21.0 mm; Accessories:8000 One Seal; Basic Interchange BCA:8507; |
| Timken D3637A Thrust Race Double Thrust Tapered Roller Bearing | Pu:3.780 kN; b:5 mm; rs (min):1.1 mm; E:62 mm; d2 (max):46.6 mm; b1:9.5 mm; D:72 mm; s:1.4 mm; Static (Coa):31 kN; B:19 mm; |
| NTN RE2437 Thrust Tapered Roller Bearing | Attainable speed for grease lubrication:7000 r/min; Calculation factor f2D:1.08; r3,4 min.:1 mm; d2:128.5 mm; ra max.:2 mm; Mass bearing:2 kg; Static axial stiffness, preload class D:681 N/µm; D:170 mm; Calculation factor f2B:1.02; da max.:127.9 mm; |
| NTN 2PE6301 Thrust Tapered Roller Bearing | d3 max.:98.552 mm; Sleeve:S 15x2.7/16; G:74.498 mm; Lock nut:AN 15; B4:16.916 mm; Mass adapter sleeve assembly:1 kg; B:15.342 mm; Lock washer:W 15; Threads per inch:12; d:75 mm; |
| NTN RE4207 Thrust Tapered Roller Bearing | Calculation factor kr:0.23; Limiting value e:0.2; db min.:127 mm; da min.:104 mm; D:190 mm; D1 ≈:161.1 mm; B:43 mm; Mass bearing:5.74 kg; Da max.:175.3 mm; r3,4 min.:3 mm; |
| Timken T9030FSAT9030SA Thrust Tapered Roller Bearing | A1:111.125 mm; Bearing:22220 EK; P180°:57.4 kN; Cap bolt recommended tightening torque:298.3 N·m; S:4.763 mm; Max. speed for Taconite seal:900 r/min; A2:224.638 mm; Ca:55.804 mm; Initial grease fill:181.44 g; R2:30.163 mm; |
| Timken H2212A Thrust Tapered Roller Bearing | P90°:138 kN; S:4.763 mm; A2:215.9 mm; Cap bolt recommended tightening torque:203.4 N·m; P180°:96.1 kN; Stabilizing ring:SR-30-0; End plug (suffix Y):EPR 16; H:320.675 mm; J1:95.25 mm; P120°:87.2 kN; |
| Timken T911FST911S Thrust Tapered Roller Bearing | Mass shaft washer:1.73 kg; d:70 mm; B:16 mm; r1,2 min.:2 mm; d1:150 mm; |
| NTN 2PE3801 Thrust Tapered Roller Bearing | Calculation factor Y1:0.81; Limiting speed:2400 r/min; 2B:124 mm; Calculation factor Y2:1.2; Mass bearing pair:32.5 kg; Ca min.:9 mm; d:120 mm; D:260 mm; r5 min.:1 mm; K:14 mm; |