| Timken T135 Machined Thrust Tapered Roller Bearings | Aa - Cage-Cone Backface Clearance:0.5 mm; Cg - Geometry Factor:0.0853; Cup Part Number:YKA32010X; C1 - Dynamic Radial Rating (1 million revolutions)5:82700 N; C - Cup Width:21.500 mm; da - Cone Frontface Backing Diameter:55.88 mm; G2 - Heat Generation Factor (Rib-Roller End):20.3; r - Cup Backface To Clear Radius2:1.27 mm; Design Units:METRIC; a - Effective Center Location3:-2 mm; |
| Timken T77 T77W Thrust Tapered Roller Bearings | Dynamic load, C:1,330 kN; ra max:2 mm; D:270 mm; Characteristic outer ring frequency, BPF0:8.65 Hz; Min operating temperature, Tmin:-40 °C; d2:180.8 mm; Da max:258 mm; Number of lubrication holes:3; b:11.7 mm; Y0:1.72; |
| Timken T201 T201W Thrust Tapered Roller Bearings | Y0:1.98; Mass:23.52 kg; b:13.7 mm; Max operating temperature, Tmax:200 °C; Y1:2.03; k:6 mm; Characteristic inner ring frequency, BPFI:10.39 Hz; e:0.33; Number of lubrication holes:3; Characteristic rolling element frequency, BSF:6.18 Hz; |
| Timken G3272C Pin Thrust Tapered Roller Bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:33000 lbf; Aa - Cage-Cone Backface Clearance:0 in; Cone Part Number:780702D; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:324000 lbf; d:7.0000 in; Ab - Cage-Cone Frontface Clearance:0.54 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:48200 lbf; B - Double Cone Width:4.1875 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:84000 lbf; |
| Timken T301 T301W Thrust Tapered Roller Bearings | Ca - Axial Load Rating:4181.39 lbf; Bearing Type:Split Cylindrical Re; Support Type:Two-Bolt Plummer Blo; Seal Type:High Temperature Pac; Bearing UPC:013992026767; Dimension M:130 mm; Maximum Speed:1970 rpm; Cr - Dynamic Load Rating:71040 lbf; Bolt Size:2 x M24; Series Type:Light Series; |
| Timken T911 Machined Thrust Tapered Roller Bearings | Material:Steel; Type:Lock Nut; Screw Type:Metric (fine) Thread; Surface Treatment:No Surface Treatment; Shape:Round shape; Thread Nominal M(mm):TM360x5; Days to Ship:9 Days; |
| Timken DX175273 Pin Thrust Tapered Roller Bearings | Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Bearing Part Number:6903; Volume Discount:Available; Bearing I.D. d(mm):17; Number of Bearings:Double; Seals:DD (Contact Rubber S; Flange Shape:Round Type; |
| Timken T691 Machined Thrust Tapered Roller Bearings | A5:18.2 mm; T max.:100 °C; d:31.75 mm; C:19.5 kN; SW:3.97 mm; A:27 mm; Weight:0.88 kg; A3:1.5 mm; Designation of housing:C206-; S:18.2 mm; |
| Timken T188 T188W Thrust Tapered Roller Bearings | d:61.91 mm; T max.:100 °C; Weight:1.47 kg; T min.:-20 °C; Recommended tightening torque for set screw:18.7 Nm; s1:32.55 mm; C:41 kN; Designation of bearing:SUC212-39; S:25.4 mm; B:65.1 mm; |
| Timken T169 T169W Thrust Tapered Roller Bearings | Volume Discount:Available; Type:Bearings with Housin; Number of Bearings:Single; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; |