| W14-71P1 Rotek Slewing Ring Bearings | Aa - Cage-Cone Backface Clearance:0 in; C - Cup Width:1.6875 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:25400 lbf; D:14.5000 in; G2 - Heat Generation Factor (Rib-Roller End):187; Ab - Cage-Cone Frontface Clearance:0.12 in; B - Double Cone Width:4.2500 in; T - Bearing Width across Cups:4.2500 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:39600 lbf; Series:134000; |
| 232.21.0475.013 Type 21/520.2 Standard 5 Slewing Ring Bearings | OD Chamfer Length (Co):0.600; ID Chamfer Angle (B deg.):30; Bore Diameter (mm):8; Bearing Type:flanged; Outer Diameter (mm):10; Bearing Bore after Mounting (di):8.055 / 7.99; Wall Thickness (S3):1.005; Material:Bronze shell with PT; Bearing Length, Nominal (B):7.500; Bearing Length Tolerance (B tol.) - +0.25 / -0.25:+0.25 / 0.25; Shaft Dia., Nominal (d):8.0000; Housing Bore Dia. (Dh):10 +0.015 / +0; |
| 232.20.0600.013 Type 21/750.2 Standard 5 Slewing Ring Bearings | Bearing Type:Split Cylindrical Re; Dimension Y:0.5 in; Dimension D:7.0 in; Dimension V:3.5 in; Cr - Dynamic Load Rating:18659 lbf; Shaft Size:1-15/16 in; Seal Type:Felt Seal; Dimension H:1.1 in; Dimension S:1.1 in; Dimension U:0.2 in; Note:This product line wa; Ca - Axial Load Rating:809.30 lbf; Dimension B:4.5 in; Bearing UPC:013992025562; Dimension N:8.0 in; Bearing Number:LSE115BR; Series Type:Light Series; |
| 62.20.0710.000.11.1503 Standard 5 Slewing Ring Bearings | D:90 mm; Basic static load rating (C0):44 kN; r2 min.:1,1 mm; d1:68,2 mm; (Grease) Lubrication Speed:24 000 r/min; Outer Diameter (mm):90; r3 min.:0,6 mm; da min.:61,5 mm; Reference grease quantity Gref:6.1 cm³; Basic static load rating C0:44 kN; Width (mm):18; r1,2 min.:1.1 mm; r4 min.:0,6 mm; E:81 mm; rb max.:1 mm; Da max.:83.5 mm; Basic dynamic load rating (C):37,4 kN; r1 min.:1,1 mm; Da min:82 mm; |
| 231.21.0475.013 Type 21/520.1 Standard 5 Slewing Ring Bearings | Basic dynamic load rating (C):1,56 kN; r1 min.:0,3 mm; C:6 mm; Outer Diameter (mm):17; Bore Diameter (mm):6; D1:13,9 mm; d1:9,2 mm; Db max:15,6 mm; Bearing number:VEX 6 /NS 7CE1; rb max.:0,15 mm; ra max.:0,3 mm; Da max.:15 mm; da min.:8 mm; Width (mm):6; (Oil) Lubrication Speed:260 000 r/min; r4 min.:0,15 mm; Basic static load rating (C0):0,5 kN; Size (mm):6x17x6; D:17 mm; r2 min.:0,3 mm; |
| 282.30.0975.013 Type 110/1100.2 Standard 5 Slewing Ring Bearings | Size (mm):45x85x19; Outer Diameter (mm):85; B:19 mm; C:19 mm; d:45 mm; D:85 mm; Bore Diameter (mm):45; Width (mm):19; Bearing number:1209; |
| 61.20.0744.500.01.1503 Standard 5 Slewing Ring Bearings | C - Double Cup Width:2.5 in; B - Cone Width:1.4550 in; db - Cone Backface Backing Diameter:2.68 in; Bearing Weight:7.29 lb; D:4.3750 in; Cg - Geometry Factor11:0.0938; T - Bearing Width across Cones:3.1250 in; Da - Cup Frontface Backing Diameter:3.96 in; Cone Part Number:539; Ab - Cage-Cone Frontface Clearance:0.07 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:11900 lbf; Cage Type:Stamped Steel; |
| 62.20.0944.500.01.1503 Standard 5 Slewing Ring Bearings | Closed End:No; Weight / LBS:0.127; Width:0.75 Inch | 19.05 Mi; Bore Diameter (mm):34,925; Component:Roller Assembly with; Outer Diameter (mm):44,45; Harmonized Tariff Code:8482.40.00.00; Noun:Bearing; Bearing number:SCH2212; m:57 g / Weight; Relubricatable:No; Width (mm):19,05; Thrust Bearing:No; Manufacturer Item Number:SCH2212; Inventory:0.0; D:1,75 inch; Weight / Kilogram:0.06; Number of Rows of Rollers:Single Row; |