| A18-80N1 Rotek Slewing Ring Bearings | - Bearings Spacers included:get better alignment; - High-grade P5 Stainless Steel:only the best materi; Size (mm):8x22x7; Width (mm):7; - Pre-lubricated with Skate Designed grease:developed in the lab; - Stockage Shields:specifically designe; - Removable inner and outer shields:cleans easy, stays t; Bearing number:Bustin Built-in; - Removable inner and outer Shields:cleans easy, stays t; Bore Diameter (mm):8; |
| 62.20.0630.001.21.1503 Standard 5 Slewing Ring Bearings | Series:15500; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:5530 lbf; Design Units:Imperial; C0 - Static Radial Rating:11300 lbf; B - Cone Width:0.6875 in; Ab - Cage-Cone Frontface Clearance:0.1 in; da - Cone Frontface Backing Diameter:1.2 in; G2 - Heat Generation Factor (Rib-Roller End):10.3; R - Cone Backface To Clear Radius3:0.050 in; Cone Part Number:15578; C1 - Dynamic Radial Rating (1 million revolutions)6:12300 lbf; |
| 60.22.0660.001.11.1503 Standard 5 Slewing Ring Bearings | C0 - Static Load:113000 lb; e - Geometry Factor:0.24; Dimension C:6.00 in; Dimension SAA:5.94 in; Oil Lubrication - B/C/O Seal:900 rpm; Shaft Size Type:Imperial; Grease Lubrication - M/N Seal:1200 rpm; Shaft Size :3-15/16 in; Shaft Tolerance:0.0030 in; Dimension B:8.780 in; Eng Internal Radial Clearance - Min:0.0030; Full Timken Part Number:QAAPF20A315SB; Pre Install Clearance Min:0.0030 in; |
| 3R6-63P9 Rotek Slewing Ring Bearings | Size (mm):110x80x40; Bearing number:C 5916 V; Factor - k1:0.099; r1,2 - min.:1 mm; d:80 mm; Outer Diameter (mm):80; Limiting speed:1800 r/min; Basic static load rating - C0:345 kN; Bore Diameter (mm):110; da - max.:94 mm; D:110 mm; s1:9.4 mm; Width (mm):40; ra - max.:1 mm; d2:88.7 mm; Basic dynamic load rating - C:208 kN; B:40 mm; Fatigue load limit - Pu:40.5 kN; Da - max.:105 mm; D1:101 mm; |
| 3R8-79P9 Rotek Slewing Ring Bearings | D:160 mm; ra max:2,1 mm; d2G:M80X2; Bore Diameter (mm):70; Y0:1,94; a:4 mm; ns:9,5 mm; Y2:2,96; Y1:1,99; ds:4,8 mm; Da max:148 mm; rmin:2,1 mm; b:12 mm; Cr:445000 N; D1:136,3 mm; e:0,34; m1:0,48 kg / Weight, wi; Width (mm):55; d1H:70 mm; Bearing number:22315-E1-K + AHX2315; |
| 231.21.0575.013 Type 21/650.1 Standard 5 Slewing Ring Bearings | D:62 mm; B:14 mm; Basic dynamic load rating (C):16,21 kN; C:14 mm; Bore Diameter (mm):35; Width (mm):14; Basic static load rating (C0):10,42 kN; Bearing number:6007-ZZ; Weight:0,14 Kg; r min.:1 mm; Outer Diameter (mm):62; Size (mm):35x62x14; d:35 mm; |
| 3R8-88E9 Rotek Slewing Ring Bearings | Da(min):119; Cr:130; (Refer.)Mass(kg):0.876; Db(min):125; Oil lub.:3500; r min.:1,5 mm; D:130 mm; r1(min):1.5; Db min.:125 mm; Bore Diameter (mm):95; C0r:186; Y0:0.92; (Grease) Lubrication Speed:2600 r/min; ra max.:1,5 mm; da(min):103.5; ra(max):1.5; r(min):1.5; Bearing No.:32919JR; da min.:103,5 mm; Basic static load rating (C0):186 kN; |
| A16-152E2 Rotek Slewing Ring Bearings | r1 min:0,3 mm; Ca:28000 N / Dynamic lo; Cua:2220 N / Fatigue li; A:0,013 / Factor min.; da max:25 mm; R:40 mm; Size (mm):20x50x36; D2:36 mm; T3:36 mm; B:7 mm; m1:0,032 kg; Width (mm):36; Outer Diameter (mm):50; D1:27 mm; D:47 mm; D3:50 mm; Da max:36 mm; C0a:50000 N / Static loa; ra max:0,6 mm; ra1 max:0,3 mm; |