| 73004L Franke Slewing Ring Bearings | misalignment angle:14 °; head width:0.344 in; race material:PTFE Composite; lubrication:Self Lubricating; shank thread size:5/16-24; shank thread length:0.750 in; thread direction:Left Hand; series:NF; radial static load capacity:2740 lbs; length to ball center:1.375 in; grade:Commercial; rod end type:Female Threaded; housing material:Carbon Steel - corro; ball material:Alloy Steel Heat Tre; |
| 66171L Franke Slewing Ring Bearings | series:205; locking device:Set Screw; manufacturer catalog number:136802; finish/coating:Nickel PTFE Composit; standards met:UL, NSF H1, AFBMA, A; operating temperature range:-40 to +180 &de; mounting type:Three-Bolt Bracket S; length through bore:2.63 in; radial dynamic load capacity:3146 lb; d:1.0000 in; lubrication type:Lubrication Fitting; expansion type:Non-Expansion Bearin; B:4.6900 in; |
| 73071L Franke Slewing Ring Bearings | B:55mm; d:190mm; Clearance:Standard; Weight:22.30 KGS; Seals or Shields:Open Type; Availability:In Stock; SKU:6238m-nsk; Cage Type:Brass; Static Load Rating (kN):282; D:340mm; Dynamic Load Rating (kN):255; Grease Limiting Speed (r/min):1600; Oil Limiting Speed (r/min):2000; |
| 7 1140 13 Rollix Slewing Ring Bearings | Basic static load rating C0:106 kN; rb max.:1.5 mm; Fatigue load limit Pu:12.2 kN; Calculation factor Y:1.9; r3,4 min.:1.5 mm; T:32.75 mm; da max.:44 mm; C:25 mm; Da min.:66 mm; ra max.:2 mm; Basic dynamic load rating C:117 kN; Calculation factor Y0:1.1; d:35 mm; Mass bearing:0.75 kg; Da max.:72.5 mm; D:80 mm; db min.:44.5 mm; Cb min.:7.5 mm; Reference speed:6700 r/min; B:31 mm; |
| 2 3074 01 Rollix Slewing Ring Bearings | D:55mm; d:35mm; Seals or Shields:Open Type; Availability:In Stock; Cage Type:Plastic; SKU:7907ctrsump3-nsk; Oil Limiting Speed (r/min):38900; Clearance:Standard; Preload:Medium; Static Load Rating (kN):9.15; Weight:0.02 KGS; B:10mm; Dynamic Load Rating (kN):12.1; Grease Limiting Speed (r/min):25600; |
| 75017A Franke Slewing Ring Bearings | H1:169.875 mm; Cap bolt recommended tightening torque:203.4 N·m; P150°:78.3 kN; Cap bolt:4 x 3/4-10 UNC; RG:3/4 NPT; ba:68.263 mm; Stabilizing ring:2 x 38151-36; H2:66.675 mm; Mass pillow block:94.8 kg; PG:1/4 NPT; P120°:85.9 kN; J1:95.25 mm; da:163.512 mm; N1:28.575 mm; Cap bolt, SAE grade:5; P180°:94.3 kN; R1:104.775 mm; H:336.55 mm; Labyrinth ring:2 x LOR 148; Da:279.999 mm; |
| 26 1091 01 Rollix Slewing Ring Bearings | inside diameter:2.3700 in; B:0.2500 in; D:2.6000 in; |
| 24 1091 01 Rollix Slewing Ring Bearings | H2:60.325 mm; Cap bolt, SAE grade:8; Max. speed for Taconite seal:775 r/min; R1:79.375 mm; P180°:84.5 kN; Appropriate attachment bolt size G:0.875 in; End plug (suffix Y):EPR 13; A1:133.35 mm; Housing:SAF 622; Da:240 mm; Initial grease fill:382.73 g; J min.:371.475 mm; Taconite seal:TER 668; J1:82.55 mm; Ca:89.789 mm; P150°:68.1 kN; N1:25.4 mm; A2:273.05 mm; R2:36.513 mm; H:287.337 mm; |